Keep plants comfortable and they will reward you!
Basically, you want a gentle breeze moving over, through, and under your plants if possible. If all the leaves are being gently rustled, it’s perfect. You don’t want to point a fan directly at your plants because that can cause wind burn, but you also don’t want any leaves sitting in stagnant or hot air. A small oscillating fan or two in the grow space can work wonders.
Consider a grow tent if you want a pre-made perfect growing environment for your marijuana plants!
Unless it’s very high or low, humidity usually won’t cause any major problems with your cannabis grow. However, there are a few tricks with humidity to get faster growth and more resin production on your buds.
When growing cannabis, you want to give light that is bright but not too bright. The amount of light you provide is one of the major factors that will determine your yields, and with smaller grow lights your yields will be limited no matter what you do.
Benefits of a great grow environment.
Making sure your plants always have a gentle breeze and plenty of fresh air helps them grow faster. Good air circulation also helps prevent problems with white powdery mildew, bud rot, and common cannabis pests like fungus gnats or spider mites.
Light also changes how your plant grows. For example, the color spectrum of light can cause your plants to grow tall and lanky or more bushy and squat. Some grow lights like LED grow lights take advantage of a custom color spectrum to help your plants grow as optimally as possible.
You need a great environment to produce the best harvest. A poor growing environment lowers both yields and bud quality!
5 Factors to Creating a Perfect Growing Environment (from most important to least important)
Note: The optimal seedling humidity is closer to vegetative plants than clones. Try to avoid letting the humidity get over 60% for seedlings or it can slow their growth.
Cannabis plants like temperatures in the 65-85°F (19-30°C) range and can start to run into problems when the plants are experiencing temperatures outside that range.
You will get the most from your indoor grow lights by reflecting light at your plants. Instead of letting the walls of the grow space absorb extra light from your grow light, you can use a reflective material to bounce it back towards your plants. This allows you to squeeze more yields out of the same grow light without having to change anything else about your environment.
In addition to making sure there’s air moving around in the grow space, it’s also important to vent out heat from your grow lights, especially if it’s getting too hot for your plants during lights-on. While many growers know they’ll need ventilation with powerful HPS lights, it’s important to note that ventilation can be just as crucial for LEDs, LECs and even fluorescent lights like CFLs or T5s if the total wattage gets high enough. For each light type, the higher the wattage, the more heat produced. If you notice the temperature is climbing above 85°F (30°C) on a regular basis, you should consider venting heat out of the grow area to keep the temperature under control. However, if the overall temperature of the entire grow room is too high, you may need to take more drastic actions such as getting an AC. Fans can move air around, but can’t lower the total amount of heat in a room.
Optimal Temps for Growing Cannabis.
The long and the short of it is: If it’s comfortable for you, it’s probably comfortable for your plants.
What makes the perfect cannabis growing environment? What does it take to get the healthiest growth and best yields from your indoor cannabis plants?
Silty soil is the ideal growing medium. It’s easy to work, warms quickly, holds moisture, has good drainage, and contains a lot of nutrients. The best silty soil is dark, crumbly loam—it’s fertile and probably won’t need any amending.
Your cannabis plants should receive as much direct sunlight as possible, ideally during midday, when the quality of light is best. As the season changes and fall approaches, your plants will get less and less sunlight throughout the day, which will trigger the flowering stage.
It’s crucial to have a good understanding of the climate in the area you’re going to grow. Cannabis is highly adaptable to various conditions, but it is susceptible in extreme weather.
Once you have an understanding of the climate in your area, you’ll need to consider a few things before planting your weed.
Soil, at a basic level, is defined as the topmost layer of earth in which plants grow—it’s a mixture of organic remains, clay, and rock particles. Cannabis plants thrive in soil rich with organic matter, and they need good drainage.
These are just some examples of amendments commonly used in different types of soils. Heavily amended soils will have long lists that break down all organic nutrients they contain. Some companies create soils that offer a great structure with base nutrients, but allow you to fill in the gaps as you desire.
Sustained temperatures above 85°F will cause your plants to stop growing, while continued temperatures below 55°F can cause damage and stunting to plants, even death.
Relying on the power of the sun, you won’t need to spend a ton of money on an outdoor grow. You’ll need some soil, fertilizer, seeds or clones, and maybe a small greenhouse to get them started. You won’t need to pay for electricity for lights, AC units, or dehumidifiers, and you can even collect rainwater.
We also advise against using nutrients designed for indoor weed growing—they are generally composed of synthetic mineral salts and can damage soil bacteria.
While some plants thrive in their native soils, which are usually one of the compositions listed above, cannabis plants are best grown in soil that includes a combination of the three consistencies above—this mixture is known as loam.
Start off with fertilizers that are inexpensive and readily available. Some release nutrients quickly and are easily used by the plant, while others take weeks or months to release usable nutrients. If done correctly, you can mix in a few of these products with your soil amendments to provide enough nutrients for the entire life of your plants. Most of these items can be purchased cheaply at your local nursery.
For most first-time gardeners, we recommend buying a quality potting soil that will provide your plants with enough nutrients to get them through most of their growth cycle without having to add many amendments. This pre-fertilized soil—often referred to as “super-soil”—that can grow cannabis plants from start to finish without any added nutrients if used correctly.
There are also commercially available soil blends that already contain the proper mix of these types of ingredients.
In general, 5-gallon pots are a good size for small-to-medium outdoor plants, and 10-gallon pots or larger are recommended for big plants. Regardless of size, you’ll want to protect the roots of your plants from overheating during warm weather, as pots can quickly get hot in direct sunlight. This will severely limit the growth of your plants, so be sure to shade your containers when the sun is high in the sky.
You can plant directly into the ground, using the preexisting soil, but you’ll need to understand your soil’s composition and amend it accordingly. If you go this route, we recommend getting your soil tested, which will minimize headaches, and it’s easy and relatively inexpensive. A soil test will tell you the makeup and pH of your soil, any contaminants present, and will recommend materials and fertilizers to amend your soil.
It’s fun and relaxing.
We recommend these organic fertilizers:
However, plants grown in pots, buckets, or barrels will likely be smaller than those planted in the ground because their root growth is restricted to the size of the container. In a broad sense, the size of the pot will determine the size of the plant, although it’s possible to grow large plants in small containers if proper techniques are used.
You also want to consider privacy and security. A lot of people want to conceal their gardens from judgmental neighbors and potential thieves. Tall fences and large shrubs or trees are your best bet, unless you live in a secluded area. Also, most state laws require that you keep cannabis plants concealed from the street.
Choosing the best outdoor cannabis grow site.
Roof: This can be great for sun but may have too much wind.
Heavy rains and high winds can cause physical damage to plants and reduce yields, and excessive moisture can lead to mold and powdery mildew, especially during the flowering stage.
Heavy clay soils drain slowly and don’t hold oxygen well, so they will need to be heavily amended. A few weeks before you plant, dig large holes where you’ll be placing your weed plants and mix in big amounts of compost, manure, worm castings, or other decomposed organic matter. This will provide aeration and drainage, as well as nutrients for the plants.
Don’t underestimate the therapeutic value of gardening. It’s relaxing to spend some time outside, roll up your sleeves, and get your hands dirty for a while. And there’s nothing better than smoking something you grew yourself.
Sandy soil is easy to work, drains well, and warms quickly, but it doesn’t hold nutrients well, especially in rainy environments. You’ll want to dig large holes for your plants and add compost, peat moss, or coco coir, which will help bind the soil together.
For first-time growers, we recommend avoiding commercial fertilizers like long-release granular fertilizers. These can be used, but you need to have a good understanding of how they work and what your plants need.
The last step involves curing the bud. “Curing is just as important as the growing process,” Lipton added. “We do a slow cure, which means that it takes anywhere from three to six weeks depending on variety.” Temperature and humidity play a large role during cure and must be maintained to ensure a great final product. “Our actual cure process is somewhat of a secret, so I cannot share the fine details,” Lipton said. “But it’s an art form and extremely crucial to our success.” The reason growers cure bud after harvesting is that it creates a smoother smoke and increases its potency. Detailed recommendations for proper curing can be found online, here and here.
“Growing cannabis in tight spaces is not my usual recommendation,” said Stephen Lipton, the cultivation manager at The Farm Recreational Marijuana Dispensary, an award-winning recreational facility in Boulder, Colorado, specializing in what it calls “craft cannabis.” At any given time, Lipton oversees close to 15,000 plants across seven different facilities in Boulder County. “If you have a really tight space and it gets too hot or too humid, you’re going to have big trouble.”
Temperature: 68 to 78 degrees Fahrenheit. “A tool you should always have is a little temperature gauge,” Lipton said. “They call them hygrometers. They’re cheap and tell you both the temperature and the humidity.”
To understand the flowering cycle, it’s important to remember that cannabis is a plant. And, like most plants, it follows the seasons. To trigger flowering — which will take 55 to 60 days to complete — growers reduce the time plants spend exposed to the light source from 18 hours to 12. “You’re basically telling your plant it’s mid-September,” Lipton said.
Both medical and recreational dispensaries now sell female cannabis clones, which retail for about $15. Alternatively, it’s commonplace for home growers to gift clones to their friends. “When you get a clone, someone will likely give it to you in a four-inch pot. You’re skipping that whole step of having to germinate seeds. You’re already 10, 14 days ahead of the game and basically ready to plant.”
Harvest and cure.
Even with a healthy clone, however, cultivating cannabis can be a long and arduous process — especially in tight indoor spaces. “A lot of people think growing is easy, but it’s not,” Lipton said. “You have to be really on it. Not everyone has success, obviously.”
To harvest, many growers begin by removing the leaves of the cannabis plant with trim scissors, followed by the buds (using pruners). “We call this bucking,” Lipton said. “Gloves are also extremely important for sanitation reasons as well as to keep your hands from becoming sticky with the resin from the plant.”
Even in our most progressive states, however, the law is far from simple. “In Colorado, it’s now county-specific,” Lipton said. “When the amendment first passed, they said you could grow six plants per person. But now, certain counties and municipalities have come out and said it’s just six per house — there’s no combining plant counts. That means you can have three vegetating and three flowering at any given time.”
While most, if not all, medical and recreational farms cultivate cannabis from seeds, guaranteeing that their plants are free from viruses, most home growers, even those with experience, typically begin with clones — essentially trimmed pieces of female cannabis plants that have been rooted in separate pots. “When most people think of cannabis — you know, what you smoke — they’re thinking about the flowers of female plants,” Lipton said. “When you grow from seeds, half of them will be males. If you’re only going to do one or two plants, you don’t want to waste your time with that stuff.” A clone sourced from a dispensary or a knowledgeable friend guarantees that the plant is female and will eventually produce bud pending proper care. “You can get up to four ounces off the right plant — if you know what you’re doing.”
After 55 to 60 days, growers begin paying close attention to their plants’ trichomes — the small, bulbous fibers that develop around the flower of the female plant. “Those trichomes will turn from clear to amber,” Lipton said. “They kind of look like red hairs. You know it’s time to harvest when about 10 to 15 percent of the trichomes turn that color.” On average, cannabis plants have a five- to seven-day window of peak harvest time.
Space: 3 x 3 x 5 feet, minimum. “The bigger the space, the better. With all the lights, closets get hot,” Lipton said. That said, closets help growers control light pollution when the plant is in its flowering cycle — one of the main reasons home growers favor them over larger spaces, such as living rooms. “If you have a spare bedroom, or a basement even, you can just use that and close the door,” Lipton said.
Before someone even begins to consider the genetics of their preferred strain, they should first ensure that their apartment is cannabis-friendly. There are five main factors to consider: space, temperature, humidity, the pH of water, and the amount of light.
Cannabis plants yield the highest-quality (and quantity) flowers after maturing. This usually takes about a month to happen. “I recommend planting in a five-gallon Home Depot bucket,” Lipton said. “It’s really important to have proper drainage, so you want to drill some holes in the bottom. The biggest mistake people make is that they overwater and suffocate the roots. Cannabis likes to be watered and dried out before it’s watered again.” During the vegetative cycle, the plant should be exposed to a minimum of 18 hours of light. Remember to open the closet door while the lights are on to prevent the space from heading north of 78 degrees Fahrenheit.
It’s important to remember that cultivating even one cannabis plant for personal consumption is felony on the federal level and punishable by up to five years in prison. Meanwhile, four US states — Alaska, Colorado, Washington D.C. and Oregon — have passed local amendments, allowing citizens who are 21 years old and over to grow a limited number of plants without fear of persecution.
Despite the hurdles, many first-time growers still choose to cultivate cannabis indoors (which is legal in Alaska, Colorado, Washington D.C. and Oregon), and there are steps to maximize a plant’s chances of succeeding. It all starts with a plant’s genetics. “For your typical closet setup, you’re going to want a plant that stays short,” Lipton said. “A lot of time that means an indica. Sativas are really tall and lanky.” (More on the difference between those two families here.)
Know the law.
Light: 2,200k. “For a closet set up, I would recommend a 175-watt HPS light,” Lipton said. “Some people try to use fluorescent lighting, but I wouldn’t recommend that. You’re just not going to get a very good outcome. Nowadays, HPS lights can just go right into your home outlet, and you’d just need a timer [to set the intervals]. Position the light directly overhead. They can be pretty powerful, so you’re going to want it at least two feet from the top of the canopy [to prevent the plant from overheating].”
Presented by Florida Man DIPA.
Though the 12-hour interval is fairly universal, knowing exactly when to induce flowering is less clear. For the home grower, it usually comes down to space; the longer one waits to trigger the flowering cycle, the taller their plant will be. A good rule of thumb: cannabis will only continue to grow 30 to 50 percent once the light source is reduced. If the plant is growing in a closet, growers should trigger the flowering cycle, understanding that there must be more than two feet of space between the canopy of the plant throughout the entirety of its life.
Another layer to consider is that cannabis cultivation must happen “out of plain sight.” “You can’t have any odor. If it’s offending people in the neighborhood, then it’s an issue.”
pH of Water: 6.3 to 6.7. “You’ll need a meter that you can stick into your water and tell you the pH,” Lipton said. “You want something between 6.3 to 6.7 pH for watering your plants. That sounds like pretty sophisticated stuff but it’s really not. A lot of times your tap water will be 7.8. You can use what they call pH down. That’s a crucial step.”
For some people, cannabis cultivation is a hobby. Others a life-long passion. But it’s unique in its vast demographic appeal. “Everyone I know grows,” Lipton said. “There are people in their 20s doing it. I know people in their 60s. It’s a fun thing for people. You don’t have to be afraid anymore.” Here are Lipton’s tips on growing your first plant.
Relative humidity: 30 to 45 percent. “If you live somewhere humid, you’re probably going to want to buy a dehumidifier,” said Lipton. “In Boulder, we sometimes have to add humidity.” At home, that can be done with a reliable humidifier.
Find a healthy clone.
Sticking to that schedule is key, he added. “Say you’re at day 30 of the flowering cycle and you come into that closet when it’s supposed to be dark and turn a bunch of lights on. You’re going to throw the whole cycle off and that’s the end of that. It only takes 10 seconds.”
Florida Man is a modern Double IPA with a tropical expression from its blend of American hops, including Citra, Azacca, El Dorado and Mandarina Bavarian. The hops are balanced by delicate peach esters from a unique Double IPA yeast and a dash of Canadian honey malt.