The best germination method depends on the cultivator’s choice. Here are some of the most common ways to pop your cannabis seeds.
The paper towel method also has its risk, as the fragile seedlings can be damaged during the potting process. The tiny roots can also get tangled in the paper towels, so make sure to move the seeds to potting soil before roots grow too long. Use your hands or tweezers to gently remove each seed from the paper towels and place them in a prepared growing medium.
Monitor your soil every day and keep it moist. Within four to seven days, you should see tiny stems sprouting from the soil.
How to germinate cannabis seeds.
To germinate seeds this way, lay one paper towel on top of a countertop, place a few seeds, and cover them with a second paper towel.
When a seed enters an environment with enough moisture, it will increase in size and slowly break out of its shell. A seedling or germ forms from which roots will emerge, helping the baby plant absorb nutrients from the soil. Seeds naturally develop roots facing down and stems stretching upward, allowing the young cannabis plant to simultaneously feed off light and earth.
First, make sure you use the correct type of soil, either gently fertilized potting soil or a seed starter with a pH level of approximately six (6). The soil contains the right acidity and enough nutrients to strengthen your young cannabis plants for the first two weeks. Be careful not to add more nutrients, or you risk overfeeding and killing your seeds.
While many plants can be germinated in the ground, cannabis seeds are fragile enough that you should germinate them before planting.
Lay one paper towel on top of a countertop, place a few seeds, and cover them with a second paper towel. Photo by: Gina Coleman/Weedmaps.
To employ water germination, fill a glass with tap water and let it sit until it reaches room temperature or around 65 degrees Fahrenheit. Add two to three plant seeds per cup and allow them to sit, watching for any changes. Change the water to fresh tap water every two days, making sure it stays at room temperature.
Germination is the process that brings a cannabis seed out of its hibernation period and starts the cannabis growth process. Photo by: Gina Coleman/Weedmaps.
The seeds should start sprouting in about two days, though older seeds can take up to a week to sprout. You can remove them from the water and place them in the soil at any point once they’ve sprouted. Once the roots are about five millimeters long, they need to be planted.
Use a spray bottle to moisten the paper towels and then store the cushioned seeds between two plates, under a face-down bowl, or gently place them in a plastic bag. Maintain a temperature of about 72 degrees Fahrenheit, keeping the paper towel wrapped seeds in the dark and away from a windowsill. In two to five days, the seeds will pop inside the paper towel sandwich and emit tiny roots, ready to plant when they reach about five millimeters in length.
Germination is the first stage of the cannabis growth cycle : the process that brings a cannabis seed out of its hibernation period and starts the cannabis growth process. After all, seeds in a bag don’t spontaneously start developing roots. Also known as “popping” seeds, seed germination begins when a seed receives environmental cues letting it know the setting is perfect to start growth.
Soil is an easy, more natural method with which to germinate your cannabis seeds. The soil protects the fragile roots from any interference, and soil is, after all, where a cannabis plant would grow in the wild.
Soil is an easy, more natural method with which to germinate your cannabis seeds because the soil protects the fragile roots from any interference. Photo by: Gina Coleman/Weedmaps.
Whether you’re planning an indoor cultivation or outdoor grow, it’s best to germinate your seeds indoors. It’s easier to maintain proper temperature, light exposure, and moisture inside, and you can protect your seeds from the elements. Indoor germination, whether using soil or paper towels, will ensure your cannabis seeds have the best chance for survival.
To germinate seeds indoors, use any of the methods described above. Within a few days, you’ll have popped seeds ready to transfer to a growing medium.
Germination itself is a crucial aspect of cannabis cultivation. The seed germination process is the foundation of every marijuana plant, and steps can be taken to boost successful popping. For example, some cultivators improve germination attempts by soaking seeds in 1% hydrogen peroxide or a compost tea for 12 hours beforehand to kill any dangerous pests.
The next set of leaves after the cotyledons are your plants first “true” leaves and will have jagged edges (serrations). At least, they are the first leaves that your seedling cannabis plant has grown all on its own, unlike the cotyledons which were already formed in the seed.
This Timeline Will Help Show You What to Expect.
Cannabis germination is the process of getting your seeds to sprout, and you know sprouting has occurred when a little white tendril pops out of the seed.
Germination Method 1: Starter Cubes & Seedling Plugs (Recommended)
We also had trouble rooting clones in Rockwool. Rockwool cubes just don’t hold enough air to get plenty of oxygen to the roots, and they tend to hold onto a lot of water and get waterlogged easily. Since Rockwool can hold a lot of water, it’s prone to “drowning” seeds.
Rockwool can be difficult to germinate marijuana seeds in, so I recommend most beginner growers sprout their seeds using another method like Rapid Rooters (mentioned above) which can also be used in hydroponic applications but are less prone to germination problems.
One way to germinate seeds is to wet a paper towel and then fold your seeds in it, then leave the paper towel in a warm place.
The reason you want to start with a small container is that your plant’s young roots thrive on oxygen. Cannabis plant roots “breathe” oxygen, just like we breathe air, and it’s important that young cannabis roots get plenty of oxygen so the plant can grow as fast as possible.
However, young plant roots do not drink much water yet. When you water seedlings or clones in a very big container, they will use up all the oxygen quickly, and the large size of the container will prevent the growing medium from drying out.
The Rapid Rooters tray is perfect for seeds or clones. Allow your young plants to sit in the tray with water until their roots are well formed and ready to be transplanted to your final destination. The standard size tray fits most humidity domes. You can refill the tray with Rapid Rooters from the bag or mat.
How to Plant Your Germinated Cannabis Seeds.
3-5 gallon container.
I used to believe that marijuana seeds were only “good” if they were extremely hard and very dark. One of the first tests I heard to check new cannabis seeds for viability was to try to crush them between my fingers. If the seeds could be crushed, they weren’t good, or so I was told . This has proven to be absolutely terrible advice!
With young marijuana seedlings, less is more .
Marijuana seedlings, especially seeds from some of the most potent strains, tend to be a bit delicate.
Germination Method 2: Plant marijuana seeds directly in growing medium.
A general guide is to have about 2 gallons per 12″ of height. This isn’t perfect since plants often grow differently, but this is a good rule of thumb.
8-10+ gallon container.
Sometimes the shell can get stuck on the seedling, but it will often fall off on its own. If it seems really stuck, you can help the seedling by gently removing it.
Seedlings definitely won’t be able to withstand full-strength grow lights or nutrients. They need to have a moist environment, but also can easily be drowned or overwatered.
After 24 hours, I recommend putting any still-ungerminated seeds in a warm, moist place to finish germinating.
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 94% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 1,183,002 times.
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
You Might Also Like.
Growing cannabis at home can be a fun project and a nice way to have your own cannabis plants on hand. You may want to grow cannabis indoors due to inclement weather in your area or due to a lack of green space in your yard. Start by germinating the seeds. Then, plant the seeds in soil or in a starter cube. Once the seeds have been planted, care for them properly so they grow and thrive.
To plant cannabis seeds indoors, first soak the seeds in lukewarm tap water for 12 hours. Discard any seeds that float to the top. Then, place the seeds on a damp paper towel on a plate with 1 inch (2.5 cm) of space between each seed. Cover the seeds with another damp paper towel. Keep the seeds in a spot that remains between 70-80°F (21-27°C), and spray the paper towels with water whenever they start to dry out. The seeds will sprout in 2-3 days. When they do, fill pots or a growing tray 3/4 of the way with loose potting soil that has a pH between 5.8 and 6.3. Press the soil down lightly, leaving some air in it. Then, use a pencil to poke 1 inch (2.5 cm) holes in the soil. Place the sprouted seeds vertically in the holes and fill the holes with potting soil. Water the soil thoroughly and place the pots or tray in a spot that’s always 75°F (24°C) or warmer. Set up a grow light over the seeds and leave it on at all times. Water the seeds every day so the soil doesn’t dry out. The seedlings will emerge in 2-4 weeks. To learn how to use cool white grow lights to help your cannabis seeds grow, keep reading!