start growing weed from seed

Two rounded cotyledon leaves will grow out from the stem as the plant unfolds from the protective casing of the seed. These initial leaves are responsible for taking in sunlight needed for the plant to become healthy and stable.

Seedling stage length: 2-3 weeks.

There are a number of changes to consider once plants go from the vegetative stage to the flowering stage:

What are a weed plant’s growth stages?

It’s important to know these stages and how long each lasts to know what the plant needs and when. Knowing where your cannabis plants are in their life cycle will dictate when to prune, train, and trellis your plants, and when to harvest.

Be mindful to increase your watering as the plant develops. When it’s young, your plant will need water close to the stalk, but as it grows the roots will also grow outward, so start watering further away from the stalk in the soil so roots can stretch out and absorb water more efficiently.

The vegetative stage of cannabis is where the plant’s growth truly takes off. At this point, you’ve transplanted your plant into a larger pot and the roots and foliage are developing rapidly. This is also the time to begin topping or training your plants.

The weather will start to turn and the sun will begin descending in the sky as your plants fatten up with sweet, sticky buds. It might be tempting, but wait until around the Fall Equinox to start harvesting.

Marijuana light cycle: 16 hours a day.

Vegetative stage length: 3-16 weeks.

If you’re growing weed indoors, you can grow whenever you like. Keep in mind that the outside environment will affect your grow space—you may need to add heaters in the winter or fans and ACs in the summer. Other than that, you can start seeds whenever you like and flip them into flower whenever you like, depending on how big you want the plants.

Seed germination.

Cannabis plants are considered seedlings until they begin to develop leaves with the full number of blades on new fan leaves. A healthy seedling should be a vibrant green color.

Seed germination length: 3-10 days.

As roots develop, the stalk will rise and you’ll begin to see the first iconic fan leaves grow, at which point your cannabis plant can be considered a seedling.

Marijuana light cycle: 16 hours a day.

At this stage, the plant is vulnerable to disease and mold. Keep its environment clean and monitor excess moisture. Be sure to give it plenty of light.

Flowering stage.

The Spring Equinox is a good reminder that it’s time to kick off the outdoor growing process and start germinating your seeds.

If you need to determine the sex of your plants (to discard the males), they will start showing sex organs a few weeks into the veg stage. It’s imperative to separate males so they don’t pollinate the females.

Within the flowering stage, there are three subphases:

The biggest variability in how long a marijuana plant takes to grow will happen in the vegetative stage—after the seedling phase and before flowering.

Cannabis plants go through a series of stages as they grow and mature, and those different growth stages call for different amounts of light, nutrients, and water.

The growth stages of marijuana can be broken down into four primary stages from seed to harvest:

Now comes the last stage: curing your cannabis and processing the trimmings. Never just dump your trimmed leaves in the bin; use it for good. You can make hash or delicious edibles from what’s left over: this plant has more to offer than buds alone!

After germination comes the vegetative or growth stage of the cannabis life cycle. In indoor conditions, the plants will keep on growing as long as they get 18 hours of light. This is a 16-8 lighting regime (18+6=24, i.e., a whole day). Autoflower strains are an exception; these switch from growth to flowering automatically.

You’re probably thinking: grow plug? Propagator? Root stimulator? What?! No worries: germinating is 100% natural. All cannabis seeds really need is light and water. Check out my preferred germination method here, or follow this grow guide to plant germinated seeds directly into the soil. Find out what works best.

LST, or low-stress training, simply amounts to bending and fixating your plants. This ensures maximum grow surface spread and enough light for optimal flowering across all branches.

Welcome to the sequel to my first post on growing cannabis at home. In it, I explained what you need to get set up for your very first weed grow. After that, you ordered your perfect seeds to work with. That means we’re all ready to roll up those sleeves and get growing! Your weed plants will go through a lot between the moment your seeds germinate and that first taste of your harvest. In this blog, I’ll discuss the stages you’ll go through before you get to enjoy the fruits of your very first cannabis grow at home!

Trimming And Drying Your First Cannabis Home Grow.

That’s why I prefer to trim first, and then drying the buds in a drying net in the same room where I grew them. I allow fresh air into the tent and keep it flowing to cut mold risks. The buds take two to three weeks to dry.

There’s all sorts of techniques to keep plant size under control.

Personally, I just love the flowering stage. You can watch the buds develop, rewarding your hard work so far. Still, the flowering stage comes with its own particular risks. As your budding colas flower, the lovely aroma of fresh weed spreads. Of course, we don’t want to share that with neighbours and passers-by. That stresses the need to use proper filtering with exhaust fans and carbon filters. Here’s a helpful tip in case you can’t control the stink, or if your power blacks out: always have a bottle of vinegar handy! In case of emergence, put a pan of vinegar on the cooker. Yes, it smells awful, but the vinegar stench will also neutralize the odour of your weed!

Harvesting and drying your buds can be done in various ways as well. You can let the buds dry first and trim them later, but some prefer to do it the other way around. In that case, branches loaded with buds are hung upside-down in the tent to dry before trimming. The downside is that your precious trichomes dry out, making them brittle and easy to lose while trimming.

When growers receive their Cannabis seeds, it is time to germinate. Germination is the first step of the real growing adventure: so far, everything was just preparation. Once a cannabis seed germinates, its protective shell cracks open, and the first tiny root peeps out. For the sentimental grower, this is an emotional moment – a bit like childbirth, actually. It’s also a moment, however, to be very delicate in handling cannabis seeds.

The flowering phase is where the actual magic happens. At this point, your home grow will start developing the (flower) buds containing the THC, CBD and other useful compounds. You can initiate the flowering stage by making your plants believe the calendar has moved past its midsummer peak. How, you wonder? Easy: just make the days shorter! Grab your timer and change the lighting settings from 18 hours of light and 6 hours of darkness to 12 hours of light/ 12 hours of dark. There you go; you’ve just started late summer in your tent! After about 8 to 12 days, you’ll see the first flowering hairs or pistils emerge. That’s a good sign: your plants have started flowering.

My biggest mistake ever was leaving the lights on after flowering in the room where I set up my tent. Sadly, the tent wasn’t light-proof, so my plants got stressed out and turned into hermaphrodites. The result: a whole harvest full of seeds that was no use at all… Fourteen weeks of work down the drain! I also made the mistake of pumping out my entire 60L nutrient mix tank in one go once. Pretty bad for plants capable of handling 10 litres at once max…

SCReen Of Green (SCROG) instead accommodates fewer plants per square metre. Bending branches allows you to weave them through a screen or wire frame. That improves light distribution, allowing for SOG-like results using fewer plants in the same space.

With the lights off, drying net in place, and exhaust fan running at 50%, air humidity slowly drops. Your buds are dry as soon as bending branches makes them snap.

After drying, I carefully remove all the buds from the nets and place them in glass mason jars to cure. The buds cure gradually, improving their taste and ‘maturing’ them until they are perfect for smoking. Curing buds is a straightforward affair: simply stick them in a jar and wait. Give them time to ‘burp’, though: open them for a few minutes to refresh the air inside and return them to their dark storage location. How long you cure is matter of personal taste. I personally cure my weed for one month before that sweet day arrives: time to smoke those fabulous Amsterdam Genetics! Let’s not kid ourselves here: this is what we’ve been working so hard for, isn’t it?

Baby Steps: Germinating Your Weed Seeds.

Once the seeds become seedlings, with roots showing on the sides and bottom of the grow plus (usually after about four days), they’re ready for planting. I start with small P9 size flower pots. I’ll leave them for 7 to 11 days to give the roots time to develop, creating a stable habitat.

Sea Of Green (SOG) allows you to grow more plants per square metre. You switch to 12/12 lighting early, creating a ‘sea’ of flowering buds.

I hope I helped you make the best start at managing a first ever cannabis home grow! I wish growers all the best and lots of fun, as well as heaps of homegrown weed of course. Should anything go wrong along the way, then don’t despair. I’ve run into some minor setbacks myself – and major ones too.

Well, you’ve made it: at this point, your cannabis plants are in full bloom! Some strains have a 7-week flowering phase, while other flower for up to 14 weeks. Decide what you want before you start. Keep a tight grip on your grow climate in the flowering phase. If it gets too cold, bud development stagnates. High air humidity invites bud rot, mildew, and other pests to ruin your harvest.

Germinated and planted: your grow is good to go!

The transition from the growth to the flowering stage is marked by serious stretching. The cannabis plants soar up to the tent roof; some strains can triple their height at this point. Take this into account to make sure your plants fit your grow space.

The next step is transferring them to the full-sized grow tent. Time to repot ad\gain: choose a flower pot that matches your approach and available space. In my case, that’s 18 litres.

From Germination To The Growth Stage Of Your Very First Cannabis Home Grow.

Indeed, we’ve been saving the best for the last: harvesting those plants to find out how much they yield! It’s almost time to start trimming. At this point, keep the air humidity n your tent between 30 and 45% to prevent fungi and bud rot issues. You don’t want to lose all that hard work right before the finish line!

Looking for genuine first-hand grow expertise, sleeves rolled up and boots in the mud? You’ll find plenty in our Nibameca blogs & grow guides ! Ever since discovering White Choco genetics, this cannaboss refuses to leave our AG grow program – and rightly so. This veteran grower is all about top quality, innovation and sustainability in indoor grow projects. This Amsterdam Genetics Grow Guru shares his experience with our readers to make the most out of every weed seed you’ll ever plant!

A small, cheap USB pocket microscope or a jeweler’s lens are great for determining trichome maturity. Clear transparent trichomes are a sign to wait some more. Once they turn milky white, with a few amber-coloured trichomes among them, you’re ready to cut the flowers. Harvest time is finally here!

Let me conclude with a personal warning: try to curb your enthusiasm! Of course you’re proud of your results, and you should be! Still, avoid the mistake of telling taal tales to your friends. Keep your hobby to yourself, just like back when you started out. Oh and another thing: you now probably have more weed lying around than ever before. Don’t go and smoke your brains out now; handle your harvest responsibly. Well-cured cannabis will last for a long time. Enjoy your crop, but enjoy it responsibly.

I continue the growth stage until I’m happy about plant size. It usually takes about three weeks, but my perfect size will differ from your ideal dimensions. It’s all up to you, and when you’re done, it’s time to start growing flower buds. Let’s start the flowering stage!

Personally, I prefer the following high success rate germination procedure. I take a glass of lukewarm water and gently chuck in the seeds. Then, I leave them alone someplace dark for 12 to 24 hours. I check them regularly: as soon as I see white tips (taproots) emerge, I carefully pick up the seed with a pincer. I place them root-down into a pre-watered grow plug. I use a water and root stimulator mix following user instructions. Then I put the plug and seed in my propagator and patiently wait for them to surface.

The growth stage begins.

Nibameca.

It can take anywhere from a couple of hours to a couple of days before you see the young seedling emerge from the soil or growing medium. If your marijuana seedling hasn’t sprouted from the soil within 10 days after being placed root-down, it probably isn’t going to make it 🙁 Even with the best practices and the best seeds, you will occasionally lose a seed. Many times it has nothing to do with you!

Basically, you want to make sure any seeds or sprouts are kept warm and moist at all times, that their roots are unexposed to light, and that they get planted right away.

Day 7 from seed.

Assume all dark seeds are viable, even if seeds can be crushed.

Bag of Rapid Rooters.

Germination Method 5: Paper Towel Method.

The reason you want to start with a small container is that your plant’s young roots thrive on oxygen. Cannabis plant roots “breathe” oxygen, just like we breathe air, and it’s important that young cannabis roots get plenty of oxygen so the plant can grow as fast as possible.

Even when following all the best practices, we just have not gotten great germination rates with Rockwool cubes, and it’s common for new seedlings not to make it. When we were using Rockwool (before we switched to Rapid Rooters), we usually lost at least 1 seed out of a batch of 6 or 8.

You’re trying to give young plants a very small dose of nutrients at first. However, even with young marijuana seedlings, the pH of your water and growing medium is important. Some growers get lucky and happen to have water with the right pH, but if you’re noticing deficiencies and problems with your seedlings, definitely take the time to understand about marijuana root pH and how it affects the plant’s overall health.

Rockwool can be difficult to germinate marijuana seeds in, so I recommend most beginner growers sprout their seeds using another method like Rapid Rooters (mentioned above) which can also be used in hydroponic applications but are less prone to germination problems.

As the seedling emerges you’ll be able to see the leaves (sometimes it will still have the seed stuck on the first leaves, like in the picture above).

Sometimes the stem of a brand new cannabis seedling can look like the roots growing out the top. But if you wait and watch, you’ll see that it’s all part of the plan. Hope these pics help someone!

Once your cannabis seedling is about fourteen days old, it’s ready to start being treated as if in the vegetative stage.

Here’s a picture showing several healthy and viable cannabis seeds.

New Rockwool cubes have a high pH – too high for healthy cannabis seed germination. Therefore it’s important to thoroughly rinse Rockwool cubes in pHed water, then let them soak in pHed water overnight before use. Since Rockwool holds onto a lot of water, after soaking they should be given a few days to dry out before planting seeds or making clones.

Germination Method 1: Starter Cubes & Seedling Plugs (Recommended)

Cons of Jiffy Pellets.

For fastest growth rates, it’s better to plant young seedlings or clones in a very small container, like a disposable plastic solo cup.

Just add you seeds and pour some water into the tray – the Rapid Rooters will do everything else for you.

Cons of Rapid Rooters.

If you want, you can put bottles on top to help retain extra humidity (like a cheap humidity dome).

One of the biggest benefits of planting your seed directly in the growing medium is you don’t have to worry about shocking your young seedling during transplant. Because your seed is already in its final resting place, your new seedling will immediately start adjusting to the environment. Every time you transplant a sprouted seed, it can cause stress as the young plant needs to readjust its new surroundings.

How to Plant Your Germinated Cannabis Seeds.

2-3 gallon container.

Another method to germinate marijuana seeds is to soak them overnight in slightly warm water, usually done in a glass drinking cup.

During the first few weeks of a young marijuana plant’s life, you have to be careful.

Rockwool is not a natural material – it’s made by heating rock and chalk to 3,000°F and air is blown through the mixture to create thin fibers of rocky material.

It’s often hydroponic cannabis growers who use Rockwool cubes since these can be safely placed in hydroponic setups, hold a lot of moisture, and are resistant to mold. Rockwool is cheap and easy to find. It comes in convenient cubes. But it does have some major drawbacks…

By planting young seeds in a small container with holes in the bottom, the growing medium will dry out much more quickly, allowing you to water more often. The young cannabis will get plenty of oxygen and water.

Sometimes you’ll have a taproot that is curved or bent. You don’t want to try to straighten it out! Open the Rapid Rooter you split, and lay the germinated seed down gently. The seed and root will naturally lay on the flattest side. Slowly close the Rapid Rooter, and you’ll see that the bent parts of the root will end up in the “crack” of the Rapid Rooter from where you cut to split it open from the side.