led bulbs for growing weed

This was not always the case. When LEDs were first gaining momentum among growers, the technology was still fairly new and had not entirely been perfected. Think about how expensive and inconvenient cutting-edge technology like smartphones were when they first came out, and it often wasn’t worth it. For example, many agree that the first-generation iPhone was not the greatest. However, today’s smartphones are much more affordable, and they are everywhere.

If you are willing to step up the quantity of your grow, that is, really take it to the next level, you should be prepared to spend a little bit more cash. A large scale 350-400 watt LED operation that will outdo the average 600 watts HID lighting system is not going to come cheap. However, a larger LED light setup will still be more cost-effective than an HID setup of the same size.

Finally, LED lights last longer than HID or CFL bulbs, ensuring many years of good use before they need to be replaced. Traditional cannabis grow lights last for only 20 thousand hours. In contrast, LED bulbs last more than twice as long, for up to 50 thousand, or sometimes even 100 thousand hours. That’s five times the life of HID lights!

Use A Pot for Pot Complete Grow Kit to help your cannabis plants grow strong.

Cost is not the only reason to make the switch to LED lights . Experienced growers know that seedlings and plants in the vegetative stage benefit more from blue light, while flowering plants need red light to thrive. Before LEDs, growers would have to purchase two different types of lights: metal halide for the vegetative or blue light stage, and high-pressure sodium bulbs for the final flowering stage.

Another thing to consider is how much money LED cannabis grow lights will save you on your energy bill. HID lights are good at what they do, but the amount of energy they use will cause your energy bills to skyrocket. This not only hurts your pocketbook, but it can also draw unwanted attention in your direction either by a landlord, a nosy neighbor, and/or the police. When people had to keep their marijuana growing activities under wraps, spiking electricity bills often gave them away. While cannabis is legal in more areas now, this does not necessarily mean that you want the whole neighborhood knowing what you are up to.

Be careful when making any changes to your light setup. Decreasing the space between plant and light too quickly might have detrimental effects. Keep an eye on your plants and take it slow!

If there is one drawback of using LED grow lights, it is that your plants’ grow time will be slower than if you were using HID lights. Again, this is because HIDs emit more energy than LEDs, leading to faster flowering.

The main types of cannabis grow lights are HID, or high-intensity discharge, CFL or compact fluorescent lights, and of course, LED or light-emitting diode lights. HID lights were the most commonly used cannabis grow lights when indoor growing first became popular in the 1990s. This was because they produced just the right number of lumens to grow cannabis indoors.

Those who could not afford a good set of HID lights would resort to CFLs, which, while not as effective during the flowering phase , managed to get the job done most of the time. Often times, these were the only options for growers with smaller operations, or those growing a couple plants for personal use. CFLs have gained some popularity over the years, but they would never be as popular as HID lights, which are trusted by growers all over the world. That is until LED lights entered the picture.

With LEDs, you don’t have to place your plants as far away as you would with HIDs. Keep lights below 300 watts about 30-70cm away, or just around 12-27 inches. Lights above 300 watts should be kept at 70-80cm away, while gradually decreasing space when flowering. Larger wattage like 450 should be close to 80 cm or 31 inches.

Start Growing with LED Lights.

Our complete grow kits include everything you need to go from seed to your very own supply of high grade medical cannabis.

Online Grow Support.

The benefits of using LED cannabis grow lights are many. The next big question is how to grow marijuana using only LED lights. A good rule of thumb is one light per every 1.5 square feet. This generally will yield you up to 6 ounces per plant, which ends up covering what you spend on the light and will definitely end up saving you money in the long run. If you are growing only 1-2 plants, our single 75 watts LED light supplies plenty of light for your plants.

Not only are LED lights more energy-efficient , but you’ll also save on water usage as well. As you are now aware, HID lights use a lot of energy, which in turn produces more heat. This dramatically increases the temperature of the grow room, causing your plants to consume more water. Cannabis is already quite the water hog when compared to other plants and growing even just a small amount of plants uses a lot of water. Any way to reduce water consumption is great for the environment, not to mention great for your utility bill.

Grow Year Round.

Durability.

Even if you’d like to grow more than a few plants, you don’t have to go for the more expensive HID lights. Simply add to your setup with either a few larger LED bulbs or several of the smaller ones. If you opt to go for the latter option, make sure that your plants and your lights are spaced out correctly, as you want to make sure that each plant gets adequate amounts of light. Using too few lights can cause stretching, whereas using too many lights leaves you at the risk of light burn, as well as energy overconsumption.

What are the top lights to grow weed indoor?

What’s the cheapest way to grow weed indoors.

There are many reasons to use LED lights when growing cannabis.

For many, the main reason is that they are relatively inexpensive when compared to the much pricier HID setup. This is especially true if you are growing a smaller number of plants. Our grow lights at A Pot for Pot are specifically designed for growing a small number of marijuana plants and is priced well under $200 – proof that high-quality lighting doesn’t need to be expensive.

Grow with the Sun.

You can find HID reflector hoods, as well as MH and HPS bulbs at any local grow shop.

These fluorescent lights are cheap and efficient and great for vegetative growth. They’re especially great for helping along germinating seeds and small seedlings because they don’t put off much heat and won’t scorch the delicate seeds. They won’t run up your electricity bill too much.

Consider how often you’ll be growing weed and how long it will take to pay off the initial investment—if you grow once a year, it’ll take a lot longer to pay off an expensive light than if you grow multiple harvests a year.

The first thing to consider before buying a grow light is how much money you want to spend. With more states coming online with adult-use legalization, homegrowing is becoming more popular and growing technology is getting better and more efficient all the time.

HID (high-intensity discharge) is an umbrella term under which MH and HPS bulbs fall, which we’ll discuss more below. These types of lamps have a hood that reflects light and bulbs that are enclosed capsules containing a gas, as opposed to bulbs you’d find in your house, which have a filament that heats up.

HID lights for growing marijuana.

Here are a few different CFL grow lights at different price points.

Both types of HIDs are usually inexpensive to buy but will eat up electricity. HIDs throw off a lot of light and heat, which the plants need to bulk up and get potent. But, they run hot, contain heavy metals, and ballasts can fail.

However, because of their low price, if you’re new to indoor growing and not sure how often you’ll do it, you may want to invest in an inexpensive HID light at first to test the water.

Another consideration with cost is that some lights run hotter than others—HIDs, for example—so they may require additional fans or an AC unit to cool down a grow space. Extra equipment means more electricity, also driving up your utility bill.

You can find lights for under $100, but they may be low quality and not produce the right spectrum of light, and you can also easily spend as much as $2,000 for a large, state-of-the-art LED.

LEDs also typically run a lot cooler than HIDs, so you may not need extra equipment to cool down your grow space, and one LED can usually be used for both vegetative and flowering growth. Some high-end LEDs allow you to change the spectrum for each growth stage.

There are many types of lights, but below are the four most common you’ll find in a grow room. There are many variations within each of these four types as well, and new lights and technology come out all the time.

LEDs (light emitting diodes) are relatively new to the cannabis growing world, compared to HPSs, MHs, and CFLs, but they are quickly proving to be the way of the future. LEDs may be more expensive to buy initially, but they are far more efficient and kinder to the environment and your electricity bill. Some cities even give tax breaks to commercial growers who install or switch to LEDs because they’re better for the environment.

These bulbs contain mercury and metal halides, produce a blueish light, and are commonly used for vegetative growth. They require a ballast to regulate the current. In the past, ballasts have been big and bulky, but digital ones are now available.

Best HID grow light brands.

As with HIDs, you can find CFLs at any local grow shop.

New LED grow lights come out all the time, but knockoffs abound. There are a lot of cheap LEDs that don’t produce the right spectrum of light for plants.

CFLs (compact fluorescent lamps) are fluorescent lights similar to what you’d find in a school or office building, but smaller. For growing weed, they are usually called “T5s”—the “T” stands for “tubular” and the “5” refers to its diameter, “⅝”.

There are many different kinds of lights out there, so it can be daunting to know where to begin. Here’s a guide to four basic types of grow lights on the market and the pros and cons of each.

Power equals poundage, so if you want big yields you’ll need more wattage. Professional LEDs can start at as little as 200 watts, and go up from there. A high-watt light can double the work of several low-watt bulbs.

Lights have fixtures and bulbs, and some require a ballast. Depending on the type and model, the bulbs or the fixtures can be more expensive. There are a lot of abbreviations, but don’t be alarmed.

How many grow lights do I need to grow weed?

Ventilation is also a concern. If you’re growing in a tight space with a light that runs hot, you’ll need to have fans in there, which also take up space. If there’s not enough room for a light and a fan, you may need to invest in a light that doesn’t run as hot, such as an LED. For example, grow tents are usually built tall to allow room for equipment up top, not to grow plants all the way to the ceiling.

Young and mature plants, or vegetative and flowering plants, respectively, like different types of light, and you can buy grow lights that target each spectrum. Commonly, growers using HIDs will use MH bulbs for vegetative plants and HPS bulbs for flowering. Some LEDs are also designed to target different light spectra.

One of the crucial elements a cannabis plant needs is light. During photosynthesis, a plant converts light energy into chemical energy, allowing it to grow strong and healthy, and with cannabis in particular, light also fuels bud production.

For HIDs, light occurs as an arc between two nodes inside the bulb. The gas contained in these bulbs is what makes MHs and HPSs different. HID bulbs are usually more expensive than the reflective hoods that hold them.

When growing outdoors you can harness the power of the sun, but in an indoor environment, sunlight is mimicked through the use of grow light bulbs, which aim to display the same spectrum of light as the sun.

Grow lights allow you to control exactly how much light your plants receive, ensuring they get the same amount of light day after day, without the grower having to solve problems with bad weather or cloudy days that happen in an outdoor environment.

Some grow lights are more expensive than others, but also more efficient, saving money in the long run. Some lights are bulky with many parts, some light in weight, and some are better suited for young or mature plants.

Note: When shopping for LEDs, make sure they contain some amount of green or white (full spectrum) light. Plants grown without at least a tiny amount of green or white light are very prone to nutrient deficiencies and simply don’t grow as well. Learn more about how light spectrums affect cannabis growth!

That being said, when it comes to the flowering/budding stage, if you can fit a bigger light you will get significantly better yields/watt by using an HID or LED grow light!

Pros of Fluorescents.

Metal Halide (MH) Grow Lights.

Ceramic Metal Halide (CMH) & Light Emitting Ceramic (LEC) Grow Lights.

HIDs are very well suited to growing cannabis and very easy to use once they’re set up. If your main goal is to get the highest yields possible, then HIDs are the way to go! However, they do require extra setup compared to the other grow lights because chances are you will need a fan to vent out heat from your grow space.

“LEC” and “CMH” both refer to Ceramic Metal Halide grow lights, which is a type of HID light that is a bit more efficient than a regular Metal Halide light.

Metal Halide grow lights are generally used for the vegetative stage because they produce a bluish light that vegetative plants love, though this type of light can also be used all the way to harvest.

1.) Fluorescent Grow Lights.

There are lots of options for grow lights that work well for growing cannabis indoors but in the end they boil down to 3 major types:

The light from an HPS appears yellow, and is great for flowering plants because the light spectrum stimulates bud production.

For growers who are looking to harvest 1/2 to 1 ounce of cannabis a month, LEDs may be your best choice. At this size, they are super low on electricity, run cool and need almost no setup! They get better yields than fluorescents but don’t run as hot as an HPS of similar wattage.

LED grow lights are very popular among cannabis growers as an alternative to HPS grow lights. They tend to run cooler and also usually come with built-in cooling. They can often be plugged into a wall and simply hung over plants which is definitely easier than setting up an HID grow light. LEDs also have great penetration so they don’t need to be moved frequently like fluorescents.

If you get very high-wattage LEDs, you may need to vent out heat to keep the grow space cool.

Some types of induction lights are well suited to stadium lighting but honestly they just aren’t that great for growing cannabis and they come with huge price tags. Even a lot of LEDs are cheaper and you’ll get better results with them. You can learn more about induction grow lights here.

Simply hang an LED light over your plants and start growing!

Fluorescents are a great choice for clones, young plants, supplemental lighting and can save you money on electricity in the vegetative stage compared to using high power lights when plants are too young to use it all anyway. They can also be used to flower plants in spaces that are shorter than what’s possible with other grow lights (aka ‘stealth growing’).

Note: Some growers may have heard of “Induction” grow lights, which are pretty rare these days but still pop up from time to time. There are two types: “Magnetic Induction” grow lights do okay for growing cannabis but they’re pretty much glorified fluorescent lights. “Plasma Induction” grow lights actually perform pretty poorly at growing cannabis.

High Pressure Sodium grow lights are often used during the flowering stage because they are very efficient and their yellow light stimulates bud production. HPS grow lights in the flowering stage get better yields per watt of electricity than any other type of grow light available today, which is a big part of why they are so popular.

The light from a Metal Halide appears a little bluish, and is well suited to growing cannabis plants in the vegetative stage.

Cannabis plants under a T5 grow light – when plants are trained (like these ones in a Scrog setup) you can get pretty decent yields from fluorescents.

Keeping CFLs close results in the best yields and growth.

High Pressure Sodium (HPS) Grow Lights.

Note 2 : Incandescent light bulbs (old fashioned light bulbs) are NOT suitable for growing marijuana!

HID grow lights are much more efficient than fluorescent lights and are powered by large, oddly-shaped bulbs. They are usually screwed into a reflector or hood to reflect more light down onto the plants. HIDs are great at growing cannabis, but they also get very hot and are usually hooked up to an exhaust to help vent out heat.

T5 Grow Lights.

These are actually just two names for the same thing. This type of metal halide bulb uses ceramic as part of the lamp just like an HPS. As a result, CMH bulbs are more efficient than regular MH lights (though still not as efficient as HPS bulbs).

T5 grow lights are one of the most easily available types of grow lights and are used to grow many different types of plants. As a result, they’re available in many garden and home improvement stores.

Full tutorial on MH & HPS grow lights (most common grow light combination for cannabis)

Example of MH/HPS Setups That Yield 1-5 Ounces/Month.