how to make weed plants grow faster

Marijuana plants, just like every other plant, need nutrients and timing is everything. During the vegetative stage, use nutrients with a high level of nitrogen, phosphorus, and potassium (N, P, and K). A ratio of 3:1:2 of NPK is ideal.

The complete guide…

The sheer array of equipment available to cannabis growers means it should, in theory, be easy to produce a bountiful harvest. New technology means you can grow dozens of plants in a small area, assuming you have a commercial license. Otherwise, you need to get the most out of a handful of plants, or the time you invest will amount to very little.

1 – Add the Correct Nutrients at the Right Time.

There is no point in adding the ideal amount of nutrients if your plants cannot absorb them fully. You must check the soil regularly to ensure it is at the right pH level. Keep the soil between 5.8 and 6.5 on the pH scale; the perfect pH for cannabis is 6.0. The soil’s pH level impacts your cannabis plant’s ability to absorb nutrients. In most cases, a pH imbalance is the cause of toxicity or nutrient imbalance.

When applying nutrients, always begin slowly and give half the dose to see how your plants react.

During the flowering stage, switch your focus to phosphorus. Aim for an NPK ratio of 1:3:1. A good option here is to mix wood ash with water as it contains a high phosphorus content.

This article provides you with five helpful tips to grow healthy buds.

You won’t get healthy buds unless your plants are exposed to their preferred temperature and humidity levels . These levels vary during the different stages of a marijuana plant’s growth cycle:

In practice, novice growers encounter plenty of difficulties and often end up with substandard results. To get the most out of your harvest, you must identify the strains you want and understand the importance of growing enormous buds. If you didn’t know, a plant’s bud appears after the plant enters the flowering stage. While the female cannabis plant leaves contain small amounts of THC, the buds are significantly more potent.

4 – Lighting.

Growing marijuana at home is easier than ever. However, your plants still need plenty of TLC to produce healthy and potent buds. Follow the hacks above, and you’ll significantly increase your chances of producing a sizable yield.

If you want big buds, increase the lighting intensity and the level of CO2 your plants receive. The trouble with indoor growing is that the air tends to have lower CO2 levels than outdoors.

More is better as far as carbon dioxide is concerned because an increased amount boosts growth.

Above all, make sure there is never more than an 18 degree Fahrenheit difference between day and night temperatures. For example, if the temperature is 72 degrees during the day, it should not go below 54 degrees at night. Also, use the lower end of the temperature scales above if you live in an area of high humidity.

2 – Achieving the Perfect pH.

You can invest in a CO2 generator if you are growing lots of cannabis plants. Be careful, though, as excessive CO2 levels are harmful to humans.

Your marijuana plants require CO2 for photosynthesis. More is better as far as carbon dioxide is concerned because an increased amount boosts growth. It is also essential to add extra CO2 when increasing the intensity of the lighting. For reference, the air we breathe contains 350-400 parts per million (ppm) of carbon dioxide. Your plants use the CO2 and combine it with light to create the sugars that are pivotal to their growth.

Keep an eye on your plants during the growing season. Increase your feeding schedule if the plants have light green leaves. Cut it back if the leaves have brown edges and its tips start to curl back. Home growers can also add compost tea to plants to aid bud growth.

If the pH of the soil is below 5.8, your plant won’t absorb magnesium. This becomes apparent when your cannabis’ leaves begin to turn yellow . If you are using a non-soil growing medium such as Rockwool, keep its pH at around 5.5. There are various products available online to either increase or reduce soil pH levels.

After years of trial and error, it has been determined that you need 400 Watts of light during the vegetative stage and 600 Watts during the flowering stage for every 13 square feet of growth. If you’re concerned about the energy cost, purchase fluorescent lighting to save money.

Therefore, if a short time to harvest is of the utmost importantance to you, you may want to consider going with the 24 hour light period during the vegetative stage for fastest growth. Again, this won't make the plant's flowering stage go any faster, but it enables you to start the flowering stage a little bit sooner. Speaking of which…

Note: There are special light schedules, that involve lowering the amount of light each day in the flowering stage, which can sometimes get harvest to come a little quicker. For example a 10-14 schedule (10 hours light, 14 hours dark each day) during the flowering stage may get plants ready to harvest a week or two sooner for some strains, but lowering the amount of light each day combined with harvesting sooner really hurts your yields.

Because of that, it's recommended to give plants 12 hours of light each day, and 12 hours of dark to get the plant to start flowering, because plants usually finish maturing in about 8-12 weeks after the switch to 12/12.

You can get faster vegetative growth with almost all hydroponic methods compared to what can be achieved with soil. That means that you could speed up time til harvest by using Deep Water Culture (DWC), Coco coir/perlite, or pretty much any non-soil growing medium. During the flowering stage, this isn't as important, but this can shave weeks off your vegetative stage time (get straight to growing buds sooner!)

Also, check out my recent autoflower grow if you want to see autos in action…

4.) Initiate The Flowering Stage Sooner.

Growing method – differing grow methods/setups can add or subtract a few weeks or even months!

The one downside is that a shorter flowering stage with less hours of light each day mean that buds get less time to fatten and you will end up with smaller yields. Therefore it's not recommended to try to get a plant to finish flowering in less than 8 weeks, as you'll end up with very small yields. This technique is best used if you have a plant that's been flowering for 2-3 months and doesn't look like it plans on stopping any time soon.

Every different strain has pros and cons, but if time is a factor for you, pay close attention to the length of the flowering stage when deciding which strain to grow. The majority of seed banks list the length of the flowering period as part of their stats for each strain.

Many of our readers write in to ask about speeding up the time to harvest.

For example, the following plant problems will add time onto your grow.

So for example, Northern Lights has a flowering stage length of about 8 weeks. If you flowered a Northern Lights strain plant from seed, your buds would be ready to harvest in about 11-12 weeks.

How can this technique reduce yields? ​The less light you give your plant overall during its life, and especially in the flowering stage, the less your yields will be in general. A strain that takes longer to finish flowering usually produces bigger yields than a short-flowering strain because it gets so many extra light-hours where it's making energy and fattening buds.

Auto-flowering strains of marijuana contain higher levels of CBD, a cannabinoid which has been associated with many medical benefits. So they may be the perfect choice for a medical marijuana user who needs to harvest quickly.

With photoperiod (regular) strains, you can manipulate the light schedule in the flowering stage to get buds to mature faster. Although most plants will start flowering when they get less than 13 or 14 hours of light a day (that's when plants usually start flowering outdoors), it can take them a long time to "finish" and be ready to harvest with days that long.

2.) Choose A Quick-Finishing Strain of Marijuana.

The amount of time spent growing varies greatly depending on the method you use to grow, the size you let your plants get and the skill of the grower. But that doesn't mean there isn't a growing method that's conducive to spending less time plant-tending.

Give plants only 10 or 11 hours of light a day to get buds to mature faster.

Many factors will affect the total time, but the average grow takes 3-4 months. Learn more about the marijuana growth timeline.

Some growers believe it's better to give marijuana plants 18 hours of light a day max, with a 6 hour dark period during the vegetative stage.

Desired yields – do you want to grow a few grams, a few ounces, or a few pounds?

I know this sounds like it doesn't need to be listed, but it's a more important job than people think. Every time your plants get sick, it slows down their growth while they try to recover. Every problem your plant runs into can add days or even weeks on to your total grow time.

1.) Fewer Hours of Light Each Day in Flowering Stage.

If you're serious about getting yields as quickly as possible, then these tactics will get you there the right way! Let's get to it!

Simply put: fixing a problem quickly equates to shorter time to harvest.

In the vegetative stage, it is important that you give your plants the right nutrients needed to get optimal growth.

Regardless of which is best for plant health, it's a proven fact that marijuana plants given a full 24 hours of light a day will grow at least a little faster during the vegetative stage (however, you may consider back down to 18/6 if your plant is sick to help it recover from problems faster).

You can get a marijuana plant to start flowering by ensuring that it gets 12 hours of uninterrupted darkness each night, often referred to as the 12-12 light schedule.

Many Indica hybrids (such as AK-48 and Northern Lights) naturally have very short flowering periods of only 7-9 weeks, which is a shorter flowering time than most other strains.

Plant strain – strain has the largest impact on growing time.

Cannabis Growth Timeline.

As a manufacturer and distributor of Air Cleaning, Ducting, and Filtration products we are proud to have been identified as an essential business. We will remain open for business performing essential operations during this crisis, supplying industrial, military, and healthcare operations with our products. We are shipping orders on time, with no delay in manufacturing.

Male: Small green sacs full of pollen will be seen on the node areas.

4. Pre-flowering.

These are unprecedented times and we are committed to protecting both our employees and our communities. Clean air has never been more important, and we’re making sure our customers have everything they need. From those working from home who need high quality air filters, to the other essential businesses we supply products to, we’re here for you.

It can take anywhere from 4 to 8 months to grow a cannabis plant, this varies based on where you’re growing. If you have an indoor grow room, your plant has the ability to flower after only a few weeks!

The quality of your plant depends on your knowledge of the cannabis growth stages and the lifecycle of your plants.

Our phone lines are open from 9am-5pm central time, Monday through Friday. Our staff is working remotely wherever possible and we will maintain a bare minimum staff on-site to perform basic operations of order processing and accounting. Our on-site staff will follow the appropriate best practices and guidelines set forth by OSHA’s latest release of "Guidance on Preparing Workplaces for COVID-19."

Female: Two pistils (the pistil contains the reproductive parts of a flower) will be growing on the buds (flowers grow above these leaves, one cluster on each side).

How to tell if your plant is a male or female.

Cannabis growth is made up of a series of stages that plants undergo during their lifecycle. Each stage during the cannabis cultivation process requires its own unique demands, including different levels of light, water, and nutrients.

MAIN SITE.

1. Germinating: 1-7 days 2. Seedling: 2-3 weeks 3. Vegetative: 2-8 weeks 4. Pre-Flowering: 1-2 weeks 5. Flowering: 6-8 weeks 6. Harvesting.

We thank you for your support and your business and we hope that this will all be over soon.

6. Harvesting.