how to grow skunk weed step by step

Good soil for cannabis relies on a healthy population of mycorrhizae and soil bacteria to facilitate the conversion of organic matter into nutrients that a plant can use. Alternately, you can use a regular soil mix and then supplement your plants with liquid nutrients.

That’s a big variance, but it really depends on how big you want your plants and how often you want to harvest—you can have multiple harvests of smaller plants, or less harvests of bigger plants.

Fans should be positioned to provide direct, even airflow throughout the garden. This typically involves using multiple fans that work together or fans that have oscillation capabilities.

As your plants get bigger and especially when they start flowering, they’ll start to smell more. Outfitting your grow with a dehuey or AC can help bring odor down.

The flowering stage will always take about eight weeks—some strains take seven, some nine, some even more, it depends on the strain.

Finding the right soil for cannabis.

For the most part, weed prefers these temps at each growth stage for optimal health:

This is easily achieved by placing an exhaust fan near the top of the space to suck out warm air—warm air rises—and adding a port or passive fan on the opposite side of the space near the floor to bring in cool air. A complete air exchange throughout the entire grow space should occur once every minute or so.

Standard plastic containers are a popular option for growers operating on a budget. These pots are inexpensive and provide the essentials for your plants.

Soil is the most traditional medium for growing marijuana indoors, as well as the most forgiving, making it a good choice for first-time growers. Any high-quality potting soil will work, as long as it doesn’t contain artificial extended release fertilizer—like Miracle Gro—which is unsuitable for growing good cannabis.

It’s a good idea to start small—the smaller the grow, the less expensive it is to set up. Newbie mistakes will be less costly if you only have a handful of plants. Additionally, most state laws only allow for growing six plants, but some allow up to 12.

Cannabis, like all plants, prefers certain environmental conditions in order to thrive. Temperature, humidity, light intensity, and airflow are all factors that will need to be monitored and regulated in order to keep cannabis healthy through its different phases.

Unless you’re growing in a large, open space with a lot of ventilation, you’ll need air-cooled reflector hoods to mount your lamps in, as HID bulbs produce a lot of heat. This requires ducting and exhaust fans, which will increase your initial cost but make controlling temperature in your grow room much easier.

You’ll also want to take this time to check over your weed plants for pests, mold, or nutrient deficiencies.

Even in legal states, you may want to conceal your crop from judgmental neighbors and definitely from potential thieves. Growing indoors allows you to grow discreetly behind a locked door.

Daily maintenance checklist for your indoor marijuana grow.

For a root system to develop and thrive, they will need the following:

So when growing weed indoors, you can control the size of your plants by flipping them into flower whenever you think they’re big enough in the vegetative stage.

Although you’ll be controlling the climate inside the grow space, climate outside the grow space will affect your plants. If the environment outside your grow space is very warm or humid, you’ll have issues controlling your grow space. Choose a cool, dry area with ready access to fresh air from outside.

Without proper airflow, a grow space can experience rapid changes in humidity or develop pockets of CO2 depletion, neither of which are good for plant growth. CO2 depletion can lead to nutrient lockout, and areas of high humidity are prone to pest infestation, mold, or mildew.

When starting with clones or seedlings, you’ll want to check your plants every day because they’re delicate and sensitive to environmental conditions. You may need to adjust temperature and humidity levels in your indoor grow space at first to hit the sweet spot for your plants.

You can make this yourself by combining worm castings, bat guano, and other components with a good soil and letting it sit for a few weeks, or it can be purchased pre-made from a local nursery or grow shop.

Setting up fans.

The main drawback is fluorescent lights are less efficient, generating about 20-30% less light per watt of electricity used; space is another concern, as it would require approximately 19 four-foot long T5 bulbs to equal the output of a single 600 watt HPS bulb.

Examine the tops and undersides of leaves for pests or discoloration—spider mites live on the underside of leaves—as well as stalks and branches. Also, check the soil for pests.

These come in different shapes and sizes and are a great way to get rid of odor in an indoor weed grow. Also known as “carbon scrubbers” for their ability to get contaminants out of the air, these employ activated and highly ionized carbon to attract particulates responsible for carrying odor, such as dust, hair, mold spores, and volatile organic compounds, and traps them in a filter.

HID (high-intensity discharge) lights are the industry standard, widely used for their combination of output, efficiency, and value. They cost a bit more than incandescent or fluorescent fixtures, but produce far more light per unit of electricity used. Conversely, they are not as efficient as LED lighting, but they cost much less.

Odor becomes much more difficult to manage in the final six weeks of a marijuana plant’s life, when trichomes and terpene production ramps up. You can also get odor-absorbing gels, which replace weed smells with other scents. Keep in mind that odor gels don’t eliminate odors, but simply mask them.

Remember, a common mistake newbie growers make is to overwater plants.

Inexpensive options include standard plastic pots or cloth bags, while some growers choose to spend more on “smart pots” or “air pots”—containers designed to enhance airflow to the plant’s root zone.

When pruning, start early and often. Cut or pinch branches just above the node where two new shoots will emerge. If you stay on top of this process, you’ll have plants that look like bonsai bushes, with plenty of bud sites but not a lot of stretching out and big gaps between nodes. This is the efficient way to get bigger yields out of small spaces but your vegetating time will increase so factor that into your schedule.

A simple loose and airy soil mix in 3-5 gallon buckets are great for beginners and much more forgiving than any hydroponic system. Be sure to cut holes in the bottom of the buckets and use saucers under them to catch any overflow. You’ll need to purchase nutrients to feed to your plants as they grow and a watering can as well.

A key part of learning how to grow weed is mastering drying and curing techniques. You do not want marijuana to dry too quickly or too slowly, as the ideal drying time for a healthy and flavorful marijuana plant is 10 to 14 days. In this video, you will learn the perfect temperature and humidity to dry and cure weed, as well as pro tips that will teach you how to grow weed and trim your plants like an experienced veteran, leaving you with a grade-A product.

Flower Power.

You’ll also need an exhaust fan and activated carbon filter to reduce heat and eliminate odors. Be sure to get one that’s rated for your tent’s size with the proper ducting size. A clip-on circulating fan will keep air moving and stop it from being stagnant. A thermometer/hygrometer is also a must for keeping track of temperature and humidity.

Use a loupe or a strong magnifying scope to take a very close look at the trichomes; the tiny glandular stalk and head sometimes referred to as “crystals”. Up close, they resemble little glass mushrooms with a stem that forms a bulbous round clear top. Inside that gland head resides the psychoactive compounds (THC, CBD etc). Harvest when the majority of the gland heads begin to go cloudy white and before they’ve gone completely amber. Harvest when they’re mostly amber if you desire a more lethargic stone.

Change your feeding regimen to one suited for flowering. Plant nutrients generally come in vegetative or flowering formulations so switch over to a “blooming” solution. Depending on the flowering time of your strain, determine when you have two weeks or so left and begin the flushing process. If you’re growing a 60-day flowering strain, start to flush your grow medium with only plain water around day 46.

The first thing you’ll need is a place to grow. I recommend getting yourself a decent grow tent. They’re cheap, made to grow inside of and can be put up and taken down quickly by one person. Some tents come with packages that include all kind of complicated hydroponic equipment. Your best bet is to purchase only what you need inside the tent and to learn how to grow weed without the expensive plastic. Some even have separate chambers for vegetative growth and cloning, making them perfect for people living in one-bedroom apartments or studios with limited room to grow.

After you’ve planted your seeds or rooted your clones, it’s time to get them growing. Lower your reflector so that it’s closer to the plants rather than making them stretch to reach for light. Raise the lighting system as your plants grow. Set your light timer to be on for 18 hours per day and off for 6 hours. During this vegetative stage, the plant will grow leaves and branches but no flowers (unless it’s an auto-flowering plant).

Indoors, The decision of when to induce flowering in your plants is entirely up to you. If you want to learn how to grow weed, it’s important to determine how much space you have and to factor in the fact that your plants will stretch for at least a few weeks after flowering is induced. I usually recommend one week per gallon of container, so a plant in a five-gallon bucket should get approximately five weeks of vegetative time.

Post-harvest, you will trim and hang up your buds to dry. This process should take about a week or two depending on the humidity and heat in your area. It’s always best to keep this process slower than 3-4 days in order to ensure you aren’t locking in that “green” chlorophyll taste. Add a humidifier to your drying room if you think your nuggets are drying out too quickly. Never leave a fan blowing directly onto your drying colas but make sure air is circulating to avoid mold and bud-rot.

How To Grow Weed.

If you don’t have access to marijuana seeds or clones from a dispensary or friend, you’ll need to get some cannabis seeds mailed to you. Don’t have them mailed to the same place you plan to grow if you’re not growing legally. Don’t just learn how to grow weed, learn how to be discreet and not brag or bring attention to yourself.

As with any garden, when growing marijuana, pests are a constant concern. For anyone learning how to grow weed, it is important to become well-versed in pest management. The last thing you want is for the marijuana crop that you have been working so hard on to be eaten away by a pest infestation. This video teaches you how to ward away pests from your precious plants with integrated pest management, stopping an infestation before it can even happen. Just a few simple steps can mean the difference between victory and defeat.

First, you’ll need a growlight. I like HID (High-Intensity Discharge) lighting – HPS (High-Pressure Sodium) or MH (Metal Halide) systems with ballasts, bulbs and reflectors. If heat from these lights will be an issue, there are also LED (Light-Emitting Diode) and CFL (Compact Fluorescent) systems you can employ. Be sure to get a light that covers your tent’s footprint and invest in a decent timer to control when your light turns on and off.

Attention to detail is essential if you are a beginner who is trying to learn how to grow weed. Even the most inconsequential detail could be the difference between a healthy plant and a dud. In this video, learn about the best type of container to use to grow your marijuana plant. We recommend a “smart pot,” which is a container that is made of breathable fabric that allows the roots of your plant to grow much larger. Larger roots mean a larger marijuana plant, which means a more bountiful weed yield when the time comes.

Avoid overfeeding and overwatering your plants at all costs. Err on the side of caution as it’s always easier to add more nutrients or water than it is to take them away. Marijuana roots prefer a wet/dry cycle so lift up your buckets and you’ll get a better idea for if they need watering or not by the weight. The first sign of overfed plants is burnt leaf tips. The first rule of how to grow weed is to learn to stay off of its way sometimes.

Tips on How to Grow Weed: The Hydroponic Garden.

Don’t prune or pinch plants at all once they’ve begun flowering – you’ll only be decreasing your harvest at that point. If the branches are threatening to reach the light, bend them or tie them down to keep them from burning. A trellis system constructed from chicken wire at canopy level (aka the ScrOG or Screen of Green system), will further spread out bud sites and increase your yields considerably. Simply train growing shoots to grow horizontally along the bottom of the screen to fill empty spots.

When you’re ready to begin the flowering stage, switch your timer to a 12 hour on/12 hour off light cycle. Be sure never to interrupt the 12-hour dark period with any light. This confuses your plant and can cause serious problems.

After you’ve determined that your buds are sufficiently dried you’re ready to jar them up for the cure. The stems should snap instead of bending and the outside of the flowers should feel bone dry to the touch. The truth is there is still plenty of water stuck in the bud and the curing process will slowly “sweat” out the remaining liquid.

Looking for the basics of how to grow marijuana? Here are the tools and information on how to grow weed affordably and effectively. All you need is a small discreet space and a little bit of a budget to get started on your indoor pot production.

Knowing when and how to harvest your buds is as important as knowing how to grow weed.

Anytime space is limited for growing, some basic rules apply: Since square footage is at a premium, plans must take full advantage of each available inch. This means choosing between growing indica-dominant strains such as Hashplant, Afghani #1 or planning on using drastic trellising and training techniques if growing out sativas such as Super Silver Haze, Jack Herer or Kali Mist.

LEDs are much more powerful than CFLs or any other fluorescent lighting. They are top-tier grow lights on par with HID lighting (HPS, LEC) when it comes to how much bud they can produce. They’re visually attractive and tend to be more appealing to growers because they’re not as ‘old-fashioned’ (though they tend to cost more). In fact, LEDs are the only grow lights that have seen major technological research and development in the past 10 years.

The size your plant gets in this stage will have a huge impact on the final size of your plant.

Dry buds slowly for best results and check often for mold or overdrying. You’ve worked way too hard to lose your crop now!

Step 3: Choose Your Growing Medium.

Yet many people do not know any other growers in real life. For these soon-to-be growers, the best option may be to purchase cannabis seeds online from a breeder or seed bank.

10-Step Beginner’s Guide to Growing Cannabis.

So far Rapid Rooters with a heat mat have given me the best germination rates of any method. They work with any growing medium, too – once the seedling has emerged, you can stick the cube directly into your growing medium or hydroponic system.

Compact Fluorescent Light Bulbs (CFLs) & household LEDs are what people commonly use to light up their homes. They aren’t really made for growing plants, but can be a good way to get your feet wet in the growing world without a significant investment. They lack the power of dedicated grow lights, but can get the job done. CFLs and home LEDs like these are dirt cheap, and you can usually buy them from any big-box store without arousing suspicion. In fact, growing with CFLs is what I did for my first grow and I got them from a local Home Depot. I imagine that my first grow would’ve ended the same (or even better) had I used small household LEDs instead of CFLs, though they weren’t available back then. Learn more about growing with CFLs.

Now that you’re fully in the flowering stage, it’s best to keep temps slightly cooler, around 65-80°F (18-26°C) to produce buds with the best color, trichome production and smell. Learn more about what you need to do in the flowering stage to produce top-shelf buds.

However, if you pick the right strain and live in a good environment, it can be much cheaper to grow outdoors, since you don’t have to provide everything for your plants. The sun will do a lot of the most cost-heavy work for you by providing a free grow light.

Step 7: Vegetative Stage – Grow Your Plant Big and Strong.

There are additional cannabis harvest methods that are much more precise – such as using trichomes to know when to harvest your buds.

Soil: Maintain 6.0 – 7.0 pH Hydroponics: Maintain 5.5 – 6.5 pH.

What space works best?

Common cannabis-friendly potting mix brands in the US:

Step 8: Flowering Stage.

There are many methods for cannabis seed germination.

When you’re growing with the sun, you need to make sure that your plants are getting at least 8+ hours of direct sunlight each day for the best results.

Surprising Fact: No one in the US has ever gone to jail or prison for simply ordering cannabis seeds online from overseas.

If your buds feel moist when you check on them, leave the tops of the jars off until the outsides of the buds feel dry to the touch. Too-moist bud is what causes mold!

Cannabis plants keep getting bigger and bigger with long days (vegetative stage) and start making buds when they get long nights (flowering stage).