how to grow a marijuana plant indoors from a seed

Suddenly, before your very eyes, the plant will transform. She will grow in height and branch out, putting off leaves and a network of branches. It is your job as the grower to meet her needs so that she can reach her full potential. With a good grow kit, this means as much light as possible and lightly watering only when she is thirsty.

Marijuana seedlings require a medium amount of light — enough to get energy to grow, but not too much light that to get burned. Leaving your seedling in direct sunlight will cause the leaves to curl, while too little light will cause the seedling to stretch. If growing outside, seedlings want to see a direct light source to stop them stretching. If inside, a sunny windowsill with more than half a day of sunlight works wonders. Otherwise, 24 to 30 inches from a grow light is an excellent supplement. Your seedling should not stretch more than 6 inches at most.

Dig a small hole in your bigger pot for the seedling, sprinkle some rooting booster in the bottom of the hole then carefully plant the whole seedling pellet holding your weed baby.

Damping off happens when the seedling is in too moist of an environment. The young plant’s immune system is not strong enough to ward off a fungus that results in the plant rotting from the bottom of the stem. When this happens, the plant will bend over and die if not treated. To help fight the infection, lightly spray a 0.5% solution of hydrogen peroxide around the affected area. However, the best option is to avoid this by not exposing your seedling to too much moisture.

They will become several inches in length. During their growth your first actual set of leaves will appear. These are typically three blades. Around this time is when your plant is “hardening off”. You will notice that the stem will start to develop a thicker skin and harden off. As the leaves of the plant get bigger, they can gradually handle more sunlight, so move it into more direct light– the more light the better!

7) Transplanting Cannabis Seedlings.

Our favorite thing about growing your own weed starting from a seed , rather than a clone, is that you get to see the full life cycle and enjoy a plant that is unique, just like you. An entirely new genetic makeup will enter the world for the first time, and if you’re lucky, something remarkable might be born.

About 10 days after germination, when the baby cannabis plant has hardened off, roots will start emerging from the bottom of your seedling pellet and the plant is ready to be transplanted into a bigger pot. Be very careful not to damage the roots during this stage. Any stress will slow its growth.

The first set of leaves to come above ground are called the cotyledons . These little leaves are packed with energy and will grow to about 1/4 in in size before eventually falling off. Your second leaves to emerge will be single blades and will be serrated, looking like regular pot leaves.

For cannabis plants young and old, it’s best to use bottled, distilled, or filtered water as these are without chlorine. If using tap water, let it sit for 48 to 96 hours before watering to dissipate any chlorine. Chlorine can also be eliminated by boiling for 20 minutes. Under normal conditions, after soaking your seedling pellet, it should contain all the moisture your plant needs before it comes above ground. As it grows, it will only need about a shot glass worth of water at most per week to keep the medium damp. Seedlings don’t drink a lot of water, which makes sense given their size. Your plant will do better in a growing medium which is damp but not soaking wet. Overwatering is just as deadly as drying out!

This is considered your marijuana plant’s vegetive stage. The goal in this stage is to keep her healthy and allow the plant to grow as big and strong as possible so that she can hold many, many flowers.

Perhaps the most exciting stage, your plant baby will come above ground in 1-2 weeks, with the average popping up in 5 to 7 days after planting. As your seedling comes above the soil, its shell might take a few days to fall off. It’s best to leave it alone, nature has the job covered. If it does not come above ground after about two weeks, the chance of success is dramatically reduced, and it’s best to try again. Even the best seeds have an 85% germination rate. When your seedling comes above ground, it is going to want to see a direct light source.

Growing your own cannabis plant starting from seed is a remarkable journey. Understanding the biology of the plant is one thing, but comprehending how a little miracle bean can turn into a gigantic tree producing flowers that can affect your body and mind is nothing short of an evolutionary miracle. Or rather a co-evolutionary story of plant and human.

Now bury so the base of its stalk is level with the topsoil. Give it a watering to set the roots in the ground, then hold off watering until you pick up the pot and it feels light in weight.

To accelerate germination, soak your seed in a small container with lukewarm water and place it in a dark and warm place (like a kitchen cabinet) for 12-24 hours, but no longer. By drenching the seed, it absorbs the water thoroughly, activating the germination process on a physical and chemical level. Doing this helps to loosen the shell as it becomes a little softer making it easier for the embryo to crack it open. When your seed sinks to the bottom, it is ready to be planted, and sometimes the seed will pop out a small taproot. A seed can still be planted though if it does not sink or put out a taproot. When a seed pops a taproot (often called a tail), it becomes more vulnerable and it is better to plant it before this root emerges.

Raising a cannabis seedling , however, requires some patience, gentle hands, and a smidgen of luck. Thankfully pot seeds are remarkably vigorous because they are what’s called endosperm seeds , which means they have almost pre-formed cotyledon leaves before you even add water. Below is a brief guide on the techniques we have found yield the most success when starting seeds and raising your seedling to a healthy plant ready for transplanting. And, don’t forget, a Pot for Pot’s Complete Grow Kits take the guesswork out so you always wind up with a splendid harvest!

2) Planting Your Weed Seed.

We see best results with seedling pellets that are made of a mix of compressed peat moss and coco husk. To expand, soak it in water for 10 to 15 minutes. Using warmer, lukewarm water, instead of cold water, will speed up the time the pellet takes to fully expand. Once your seedling pellet has absorbed enough water and has expanded to its maximum size, gently squeeze to remove excess water. The growing medium should be like a damp sponge that would not leave streaks on the table. Dig a small hole about 1/4 inch deep for your seed. Use a spoon to lift the seed out of its bath. If it has popped out a taproot be careful not to damage it. Gently place the seed into the hole and lightly cover it with dirt from the pellet. Now that you have started the germination process, your seedling will come above ground within two weeks. The older the seed, the longer it takes for it to germinate.

Our complete grow kits include everything you need to go from seed to your very own supply of high grade medical cannabis.

5) Watering Your Cannabis Seedling.

Seeds for these varieties are now widely available online and through dispensaries. It should be noted, however, that any plant grown from these seeds is not guaranteed to produce high levels of CBD, as it takes many years to create a seed line that produces consistent results. A grower looking to produce cannabis with a certain THC to CBD ratio will need to grow from a tested and proven clone or seed.

Through cloning, you can create a new harvest with exact replicas of your favorite plant. Because genetics are identical, a clone will give you a plant with the same characteristics as the mother, such as flavor, cannabinoid profile, yield, grow time, etc. So if you come across a specific strain or phenotype you really like, you might want to clone it to reproduce more buds that have the same effects and characteristics.

As we’ve mentioned, cannabis is a dioecious plant, meaning male and female reproductive organs appear on different plants.

What are high-CBD cannabis seeds?

A seed has germinated once the seed splits and a single sprout appears. The sprout is the taproot, which will become the main stem of the plant, and seeing it is a sign of successful germination.

You might also find a mature seed that has been physically damaged through poor handling, like rough trimming. In those cases, it probably isn’t worth the effort to try and germinate the seed.

The main drawback to growing from seed is there is no guarantee as to what you’ll end up with—if you buy a regular pack of cannabis seeds, it will be a mix of males and females. You’ll need to sex them out (more below) to identify the males and get rid of them, because you don’t want your females producing seeds.

Pre-flowers can initially be extremely small and hard to identify with the naked eye, but you can use a magnifying glass to get a better look.

Most experienced or commercial growers will not use feminized seeds because they only contain one set of genes, and these should never be used for breeding purposes. However, a lot of beginning growers start with feminized seeds because they eliminate the worry of having to deal with male plants.

Marijuana seeds can be acquired from an array of sources and can vary in quality. For more info on how to buy marijuana seeds, check out our Guide to buying cannabis seeds.

You can also minimize headaches and avoid the hassle of seed germination and sexing plants by starting with clones.

What are feminized cannabis seeds?

Most cannabis plants begin flowering when the amount of light they receive on a daily basis reduces. Outdoors, this happens when the sun starts setting earlier in the day as the season turns from summer to autumn. Indoor growers can control when a plant flowers by reducing the daily amount of light plants receive from 18 hours to 12 hours.

Cannabis plant sex organs appear on nodes, the points where branches grow off from the main stalk.

With cloning, you don’t have to get new seeds every time you want to grow another plant—you just take a cutting of the old plant—and you don’t have to germinate seeds or sex them out and get rid of the males.

Most seeds that you will buy are regular seeds as described above, but here are a couple more types.

This is sometimes referred to as “cloning by seed” and will not produce any male plants. This is achieved through several methods:

Transplanting germinated cannabis seeds.

Finding a cannabis seed in your stash is not ideal, but we’ve all been there before. Although much less common than it once was, it still happens. Sometimes you’ll notice one when grinding down some flower, or you’ll see one pop, spark, and crackle from the heat of a lit bowl.

Autoflowering seeds are also popular with beginning growers. They are easy to grow because you don’t have to worry about light cycles and how much light a plant receives.

Many marijuana growers start autoflowers early in the season, and at a different time than a regular crop, so keep the season and climate in mind when growing and harvesting—your plants still need warmth to grow, and rain can give them bud rot. Consider growing in a greenhouse to protect them.

Plants grown from seed can be more hearty as young plants when compared to clones, mainly because seeds have a strong taproot. You can plant seeds directly into an outdoor garden in early spring, even in cool, wet climates.

Autoflowers can be started in early spring and will flower during the longest days of summer, taking advantage of high quality light to get bigger yields. Or, if you get a late start in the growing season, you can start autoflowers in May or June and harvest in the fall.

Feminized cannabis seeds will produce only female plants for getting buds, so there is no need to remove males or worry about female plants getting pollinated. Feminized seeds are produced by causing the monoecious condition in a female cannabis plant—the resulting seeds are nearly identical to the self-pollinated female parent, as only one set of genes is present.

Make sure you have consistent airflow across your entire plot. Depending on the size of your grow room, you can achieve this easily. Utilize several types of fans, including oscillating wall mount, stand fans, and box fans. Place them strategically to create good air flow throughout the space.

Lastly, some strains indeed require more calcium than others to produce robust, healthy nugs. Perform a little research on the particular strain you are growing. This process enables you to become more familiar with the kind of “food” it needs and prefers the most.

You can get these macronutrients pre-packaged in liquid or powder form (if you’re using an un-supplemented soil mix). However, a lot of organic “super soils” already contain them in sufficient amounts.

HID grow lights.

You must also operate within the boundaries of the law before getting started. Growing marijuana remains illegal in many U.S. states. Make sure home cultivation is allowed where you live before proceeding. Assuming you are legally able to continue, keep reading our detailed guide to growing cannabis indoors.

HID lights produce a substantial amount of heat. Therefore, proper use of air circulation and conditioning becomes vital. Some growers choose air-cooled fixtures to mechanically remove heat.

Here’s a basic rundown of the most popular types of cannabis grow lights used today.

[The information in this article has under no circumstances been created for – or is intended to be used for – illegal purposes. Growing/cultivating cannabis is illegal in many U.S. states. We, therefore, advise that all readers become familiar with current laws and regulations in their region before they learn how to grow cannabis indoors].

The first step is to cut off the big water leaves, otherwise known as the fan leaves. They have minimal THC in them and are generally removed. You’ll notice a visible difference between the long, green fan leaves and the smaller sugar leaves. The latter is covered in resinous glands (trichomes).

The most commonly used lights for DIY-style growing are probably HID (high-intensity discharge) grow lights. They typically represent the best overall value in terms of cost, efficiency, and ease-of-operation.

We also recommend investing in a pH meter to check on the quality of your water and soil regularly. If you’re growing in soil, try to keep the pH between 6 and 7, with the sweet spot being 6.2-6.5. If you’re growing hydroponically, 5.5 to 6.5 is an appropriate range with the sweet spot of 5.8-6.0.

Step 6: Choose a “Canna-tainer” (Container) to Grow Your Cannabis In.

The frequency of watering and the amount you give is determined by a few obvious things. These include the size of the plant, the stage of development, and the rate of photosynthesis (how fast it’s growing). However, there’s no exact science when deciding how much water to give and how often.

Some people like to grind the sugar leaves and use them. However, it is all about the clean, leafless nugs if the goal is to fully enjoy an intoxicating high. You can use the sugar leaves to make cannabutter, however. After trimming, you should hang the buds up to dry. After 7-10 days, you can place them in airtight containers to cure. The more patient you are, the better the buds will taste. They are also more potent!

General potting soil doesn’t work very well. You want a high-grade horticultural potting mix, which is light and airy. Some mixes come “charged” with a small amount of nutrients to get you through the first few weeks. However, these will need regular fertilizing later.

If you don’t know how to tell a male cannabis plant from a female , we’ve got a great article on the topic.

For example, most growers use one of two main types of HID lamps/bulbs depending on the developmental stage. Metal halide (MH) bulbs are best during vegetative growth. High-Pressure Sodium (HPS) is the preferred option for the mature flowering stage. If you can only afford one, choose HPS as they are much better for flowering and are more efficient on a ‘watt-to-light’ scale.

Soil vs. Soilless Growing.

Make sure your cultivating space is sanitized and clean. There’s an inherent risk posed by pests and contaminants. A messy space invites pathogens, harmful bacteria, and mold. A good idea is to plan a bi-weekly cleaning routine and stick to it.

Make sure there are holes drilled into your growing container so the water can drain out. When watering, try, and only moisten the soil rather than saturating it. This allows you to fully saturate the pot without overwatering. Try not to water until they’re almost dry. This is called cycling.

The next step is a self-monitoring system to control it all. We assume you can’t spend 24 hours a day in your grow space! You need a 24-hour timer and an adjustable thermostat. The latter allows you to set your exhaust fan to switch on once temperatures go above a certain degree. The result is a relatively stable temperature range and humidity level while saving energy and money.

While this is true to an extent, there is such a thing as “too much water.” Overwatering your indoor cannabis plants can prove detrimental to their productivity, and potentially stunt or kill them!

Ensuring your plants get the right nutrients is probably second only to lighting in terms of importance. Proper nutrient selection and application are among the most critical factors in growing premium-grade cannabis. While weed is resilient, growing it in sub-optimal conditions means you will miss out on yield and potency.

It’s very important to grow your cannabis plants to a size suitable to your space and likewise to the container you choose. You will need to transplant every time your plants double to triple their size. Small cups or 4-6” pots are good for starts.