cannabis seeds wiki

Question about scales or proper use of pesticides? The Oregon Department of Agriculture regulates weights and measures and pesticide application. More information about those topics can be found on ODA's cannabis page.

Question about OLCC administrative rules? The current recreational marijuana administrative rules can be found on the Secretary of State's website. The rules should be your first resource for questions like what the limits are for trade samples and quality control samples or how much you can sell per day to a customer. Recent or pending rule changes can be found on the OLCC's website under Laws and Rules.

Question about the Marijuana Testing Rules? Refer to Oregon Health Authority's lab testing website for requirements regarding testing for specific products and categories.

Oregon Metrc Program Information Statement from OLCC Deputy Director Steve Marks and Franwell regarding the Cannabis Tracking Software program in the state of Oregon.

The scope and purpose of this Wiki is to provide users with a reference point for various functions, requirements, and resources related to Metrc, the OLCC's cannabis tracking system. The Wiki is meant for reference only and is not to be used as a substitute for knowledge on the laws, rules and regulations related to the legal marijuana system in Oregon. No legal advice or counsel is intended or should be gleaned from this Wiki and licensees and users are responsible for their own compliance knowledge.

A resource for how-tos and answers to frequently asked questions regarding Metrc and Oregon’s marijuana program (This page last updated 06/26/19)

Question about waste? The Department of Environmental Quality oversees solid and hazardous waste and can answer questions about proper disposal. See DEQ's cannabis page for more details and contact information.

If you encounter a technical problem or just want to provide general comments regarding your visit to the Oregon Metrc Wiki, we welcome your Feedback. (Clicking the link will open your e-mail). If you discover a broken link or typo and can include the URL in your feedback that will greatly assist us in providing a quick resolution. Thanks for helping us keep the Wiki working and relevant!

This article has been viewed 1,183,002 times.

wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 94% of readers who voted found the article helpful, earning it our reader-approved status.

This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.

Growing cannabis at home can be a fun project and a nice way to have your own cannabis plants on hand. You may want to grow cannabis indoors due to inclement weather in your area or due to a lack of green space in your yard. Start by germinating the seeds. Then, plant the seeds in soil or in a starter cube. Once the seeds have been planted, care for them properly so they grow and thrive.

To plant cannabis seeds indoors, first soak the seeds in lukewarm tap water for 12 hours. Discard any seeds that float to the top. Then, place the seeds on a damp paper towel on a plate with 1 inch (2.5 cm) of space between each seed. Cover the seeds with another damp paper towel. Keep the seeds in a spot that remains between 70-80°F (21-27°C), and spray the paper towels with water whenever they start to dry out. The seeds will sprout in 2-3 days. When they do, fill pots or a growing tray 3/4 of the way with loose potting soil that has a pH between 5.8 and 6.3. Press the soil down lightly, leaving some air in it. Then, use a pencil to poke 1 inch (2.5 cm) holes in the soil. Place the sprouted seeds vertically in the holes and fill the holes with potting soil. Water the soil thoroughly and place the pots or tray in a spot that’s always 75°F (24°C) or warmer. Set up a grow light over the seeds and leave it on at all times. Water the seeds every day so the soil doesn’t dry out. The seedlings will emerge in 2-4 weeks. To learn how to use cool white grow lights to help your cannabis seeds grow, keep reading!

You Might Also Like.

About This Article.

Feminized seeds are bred to contain no male chromosomes, which will be able to produce the crop of resinous buds sought by most growers. For gardeners who require a quick and easy cultivation process, feminized seeds are the ideal choice. Some medicinal cannabis users may be deterred from growing their own supply because of the perceived difficulty of growing or of identifying the different genders and removing males early in the blooming period. Feminized seed-strains offer a simple solution to these issues, as there is no need to spend time in the first weeks of flowering checking for male plants.

Other times you will have no choice but to produce feminized seed because it will be a female plants genetics that you want to preserve and you won’t have any males. Perhaps you received these genetics via clone or didn’t keep males.

Auto-flowering cannabis and the easily distributed seed have opened a whole new market in the world of the online grow-shop, making it easy for home growers with shortage of space to grow rewarding cannabis plants in many different varieties. To grow plants indoors, a growing medium (e.g. soil or growing Potting soil, irrigation (water), fertilizer (nutrients), light and atmosphere need to be supplied to the plant.

To Feminise or not to Feminise Edit.

The ideal way to produce feminized seed through hormonal alteration of the plant. By adding or inhibiting plant hormones you can cause the plant to produce male flowers. Because you did not select a plant that produces male flowers under stress there is no genetic predisposition to hermaphroditism in the seed vs plants bred between a male and female parent. There are actually a few ways to do this, the easiest I will list here.

Auto-flowers have been rising in popularity fast and there are now auto flower growers communities. These Web properties allow users to get information on how to grow these non photo-sensitive plants and what are the best practices when producing and germinating auto-flower seeds.

A male plant or a plant with male flowers will pollinate your entire crop rendering it seedy. You probably don’t want THAT many seeds so how can you avoid it? Moving the male to another room might work but if that other room shares an air path via ducting or air conditioning then pollen may still find its way. One technique is to construct a male isolation chamber.

Simply construct a generator using a 9-12 v power supply (DC output, if it says AC then its no good) that can deliver at least 250ma (most wall wart type power supplies work, batteries are not recommended since their output varies over time). The supply will have a positive and negative lead, attach silver to each lead (contrary to Internet rumors, you aren’t drinking this so cheap 925(92.5%) Stirling silver is more than pure enough. You can expose the leads by clipping off the round plug at the end and splitting the wires, one will be positive and the other negative just like any old battery. Submerge both leads about 2-3 inches apart in a glass of distilled water (roughly 8 oz). Let this run for 8-24 hrs (until the liquid reads 12-15 ppm) and when you return the liquid will be a purple or silver hue and there may be some precipitate on the bottom.

Silver Thiosulfate is a substance that has similar principle, application and results of CS, but is more difficult to make. STS is more difficult to acquire, but it can still be obtained directly from a chemical supply company. STS is not an expensive or controlled substance.

There are a number of important characteristics when selecting parents. First are you making fem seeds? If you are then both parents will be female. This makes things easier. If not then the best you can do is select a male with characteristics in common with the females you hope to achieve from the seed.

Selecting Suitable Parents Edit.

To make feminized seed you must induce male flowers in a female plant. There is all sorts of information on the Internet about doing this with light stress (light interruptions during flowering) and other forms of stress. The best of the stress techniques is to simply keep the plant in the flowering stage well past ripeness and it will produce a flower (with seed).

To use the silver, spray on a plant or branch three days prior to switching the lights to 12/12 and continue spraying every three days until you see the first male flowers. Repeated applications after the first flowers appear may result in more male flowers and therefore more pollen. As the plant matures it will produce pollen that can be collected and used to pollinate any female flower (including flowers on the same plant).

The first ‘auto-flowering cannabis seed’ which came on the market a few years ago was the Lowryder #1. This was a hybrid between a Cannabis ruderalis, a William’s Wonder and a Northern Lights #2. This strain was marketed by ‘The Joint Doctor’ and was honestly speaking not very impressive. The genetics of the ruderalis was still highly present which caused for a very low yield and little psychoactive effect. Not very attractive.

There are numerous myths surrounding feminized seeds. Feminizing seeds are a bit more work than simply crossing two plants naturally. However it will save you a lot of time in the end. If you make fem seeds properly then there is no increased chance of hermaphrodites and all seeds will be female. This means no wasted time and effort growing males and it means that all your viable seeds produce useful plants. Since roughly half of normal seeds are male this effectively doubles the number of seeds you have.

Pollinating a Plant Edit.

To pollinate a plant you can brush the pollen on a flower with a cotton swab or you can take the plastic bag, then wrap the flower inside it and shake, trapping the pollen inside for easier transportation. In this way you can selectively pollinate plants and even individual buds and branches.

This is the least expensive and most privacy conscious way to produce fem seed. CS has gotten a bad name because there is so much bad information spread around about its production and concentrations. It doesn’t help that there are those who believe in drinking low concentration colloidal silver for good health and there is information mixed in about how to produce that low concentration food grade product. Follow the information here and you will consistently produce effective CS and know how to apply it to get consistent results.

This liquid is called colloidal silver. It is nothing more or less than fine particles of silver suspended in water so it is a completely natural solution. It is safe to handle without any special precautions. [ citation needed ] The silver inhibits female flowering hormones in cannabis and so the result is that male flowering hormone dominates and male flowers are produced.

Obviously potency, yield, and psychoactive effects are critical to the selection process. But some other important traits are size, odor, taste, resistance to mold and contaminants, early finishing and consistency.

A male isolation chamber is simply a transparent container such as a large plastic storage tub turned on its side (available at your local megamart). Get a good sized PC fan that can be powered with pretty much any 12v wall adapter, by splicing together the + (yellow or red on fan, usually dotted on power adapter) and the – wires (black on fan, usually dotted power adapter) just twist with the like wire on the other device and then seal up the connection with electric tape. Then take a filtrate filter and cut out squares that fit the back of the pc fan so that the fan pulls (rather than pushes) air through the filter. Tape several layers of filter to the back of the pc fan so all the air goes through the filter. Now cut a large hole in the top of the plastic container and mount the pc fan over top of it so it pulls air out the box. You can use silicon sealant, latex, whatever you’ve got that gives a good tight seal.